Teachers’ Handbook: Building a Successful YouTube Channel – 10 Must-Dos

10 YouTube Tips for Teachers

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:

1. Give lessons and instructions when they are absent
2. Have an efficient way of explaining touch concepts
3. Trigger interesting and unique discussions amongst the students
4. Archive all their work and make them easily accessible for present and future students
5. Flip lessons
6. Help the students in reviewing for upcoming exams
7. Access potential students in other countries
8. Find relevant clips and use them as complimentary materials
9. Personalize feedback to students by sending them private videos on the channel.

These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.

---

Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

10 Tips for teachers creating a YouTube Channel

Below are some of the tips for teachers who aspire to create successful YouTube channels:

1. Understand how YouTube channel work

It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.

2. Define your content

It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.

3. Shoot your videos

If you decide to shoot the videos on your own, consider the following:

• Always shoot on landscape
• Ensure there is adequate light and keep the lighting consistent
• Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
• Avoid shakes and keep the shots relatively short
• Invest in a good camera and good microphone

4. Edit and upload the videos

After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.

5. Create a playlist

When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.

6. Block Video Ads

Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.

7. Add descriptions

Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.

8. Block comments

If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.

9. Add questions to the videos

You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.

10. Promote your channel

If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.

Conclusion

A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:

1. Give lessons and instructions when they are absent
2. Have an efficient way of explaining touch concepts
3. Trigger interesting and unique discussions amongst the students
4. Archive all their work and make them easily accessible for present and future students
5. Flip lessons
6. Help the students in reviewing for upcoming exams
7. Access potential students in other countries
8. Find relevant clips and use them as complimentary materials
9. Personalize feedback to students by sending them private videos on the channel.

These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.

---

Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

10 Tips for teachers creating a YouTube Channel

Below are some of the tips for teachers who aspire to create successful YouTube channels:

1. Understand how YouTube channel work

It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.

2. Define your content

It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.

3. Shoot your videos

If you decide to shoot the videos on your own, consider the following:

• Always shoot on landscape
• Ensure there is adequate light and keep the lighting consistent
• Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
• Avoid shakes and keep the shots relatively short
• Invest in a good camera and good microphone

4. Edit and upload the videos

After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.

5. Create a playlist

When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.

6. Block Video Ads

Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.

7. Add descriptions

Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.

8. Block comments

If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.

9. Add questions to the videos

You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.

10. Promote your channel

If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.

Conclusion

A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:

1. Give lessons and instructions when they are absent
2. Have an efficient way of explaining touch concepts
3. Trigger interesting and unique discussions amongst the students
4. Archive all their work and make them easily accessible for present and future students
5. Flip lessons
6. Help the students in reviewing for upcoming exams
7. Access potential students in other countries
8. Find relevant clips and use them as complimentary materials
9. Personalize feedback to students by sending them private videos on the channel.

These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.

---

Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

10 Tips for teachers creating a YouTube Channel

Below are some of the tips for teachers who aspire to create successful YouTube channels:

1. Understand how YouTube channel work

It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.

2. Define your content

It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.

3. Shoot your videos

If you decide to shoot the videos on your own, consider the following:

• Always shoot on landscape
• Ensure there is adequate light and keep the lighting consistent
• Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
• Avoid shakes and keep the shots relatively short
• Invest in a good camera and good microphone

4. Edit and upload the videos

After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.

5. Create a playlist

When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.

6. Block Video Ads

Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.

7. Add descriptions

Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.

8. Block comments

If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.

9. Add questions to the videos

You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.

10. Promote your channel

If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.

Conclusion

A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:

1. Give lessons and instructions when they are absent
2. Have an efficient way of explaining touch concepts
3. Trigger interesting and unique discussions amongst the students
4. Archive all their work and make them easily accessible for present and future students
5. Flip lessons
6. Help the students in reviewing for upcoming exams
7. Access potential students in other countries
8. Find relevant clips and use them as complimentary materials
9. Personalize feedback to students by sending them private videos on the channel.

These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.

---

Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

10 Tips for teachers creating a YouTube Channel

Below are some of the tips for teachers who aspire to create successful YouTube channels:

1. Understand how YouTube channel work

It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.

2. Define your content

It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.

3. Shoot your videos

If you decide to shoot the videos on your own, consider the following:

• Always shoot on landscape
• Ensure there is adequate light and keep the lighting consistent
• Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
• Avoid shakes and keep the shots relatively short
• Invest in a good camera and good microphone

4. Edit and upload the videos

After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.

5. Create a playlist

When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.

6. Block Video Ads

Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.

7. Add descriptions

Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.

8. Block comments

If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.

9. Add questions to the videos

You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.

10. Promote your channel

If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.

Conclusion

A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Started Streaming? Learn OBS for Youtube Now

Live stream to youtube with OBS step by step guide for beginners

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1. Stream Now set up
• Part2. Set up Your Live Streaming Encoder
• Part3. Youtube Events set up
• Part4. Video tutorial

1. Stream Now set up

Follow these steps to live stream your impressive videos to YouTube using Stream Now tool:

Step 1: First of all you need to login with your account and then move to Creator Studio option directly.

Step 2: Choose the Video Manager option from top most toolbar.

Step 3: From the drop down menu, simply select Live Streaming option to begin with.

Step 4: Now hot the steam now option on your screen.

Step 5: Change or Upload your thumbnail as per need.

Step 6: It is time to provide an eye catching title to your video, add description and finally choose category from the drop down menu.

Step 7: While using stream option, never forget to click on ‘make archive unlisted when complete’ option so that you can save as well as watch your content on YouTube at later stage.

Step 8: You can monetize your ads as per need.

Step 9: It also provides options to add cards.

Step 10: Now move to encoder setup and then simply copy and paste these details to your streaming software.

Step 11: Now you can set your live chat option as per your requirement.

Step 12: The analysis window will help you to know about how many viewers are connected to your video as well as the message updates will be reflected.

Step 13: Stream health can be monitored directly.

Step 14: One can also use the social media button for live shares.

Click here

2.Set up Your Live Streaming Encoder

As soon as you have completed the above set up then next task is to adjust settings of your streaming encoder. It is possible to make easy selection out of wide range of live streaming encoders. The details below are provided with reference to OBS too that is open source type free to access software.

Step 1: First of all you need to visit official website of OBS and get your software tool installed on your system.

Step 2: Now launch OBS on your device and directly go to settings option.

Step 3: It is time to copy the stream key from YouTube and then paste it directly in the specified field of OBS.

Step 4: Users can now add their sources and scenes.

Step 5: Once all these settings are done then you can simply hit the option for start streaming and it will bring your content to YouTube directly.

3. Youtube Events set up

Live stream is little different from Stream Now platform as it allows users to schedule the streams as well as a connectivity to Google Hangouts is provided. These easy to follow steps will assist you to handle all settings for your events using Live Stream tool:

Step 1: Simply click on the schedule event option on screen.

Step 2: It is much easier to make settings for basic information as well as audience type. Make some desired changes to SNS platform. If you select the Quick type then it will directly select your webcam and you need not to make additional complicated settings whereas the custom type option provides easy set up options with OBS.

Step 3: The advance settings option works same as that of stream now features and users can adjust most of these settings as per their streaming needs.

Step 4: Users can turn monetization On or Off as per their preferences.

Step 5: As soon as you finish all above settings then simply click on the create event option.

Step 6: One more window will appear on your screen and here you can make adjustment for preferred bit rate. Also put your dedicated stream key with encoder.

Step 7: When all above steps are completed then you need to hit the option for save changes so that your tool can act accordingly.

Step 8: Now click on events and here you will be able to find your event. Move to live control room if you want to access complete details about this event and you can easily delete it.

Step 9: Users can set privacy terms or simple delete the event that is currently in action.

Video tutorial

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1. Stream Now set up
• Part2. Set up Your Live Streaming Encoder
• Part3. Youtube Events set up
• Part4. Video tutorial

1. Stream Now set up

Follow these steps to live stream your impressive videos to YouTube using Stream Now tool:

Step 1: First of all you need to login with your account and then move to Creator Studio option directly.

Step 2: Choose the Video Manager option from top most toolbar.

Step 3: From the drop down menu, simply select Live Streaming option to begin with.

Step 4: Now hot the steam now option on your screen.

Step 5: Change or Upload your thumbnail as per need.

Step 6: It is time to provide an eye catching title to your video, add description and finally choose category from the drop down menu.

Step 7: While using stream option, never forget to click on ‘make archive unlisted when complete’ option so that you can save as well as watch your content on YouTube at later stage.

Step 8: You can monetize your ads as per need.

Step 9: It also provides options to add cards.

Step 10: Now move to encoder setup and then simply copy and paste these details to your streaming software.

Step 11: Now you can set your live chat option as per your requirement.

Step 12: The analysis window will help you to know about how many viewers are connected to your video as well as the message updates will be reflected.

Step 13: Stream health can be monitored directly.

Step 14: One can also use the social media button for live shares.

2.Set up Your Live Streaming Encoder

As soon as you have completed the above set up then next task is to adjust settings of your streaming encoder. It is possible to make easy selection out of wide range of live streaming encoders. The details below are provided with reference to OBS too that is open source type free to access software.

Step 1: First of all you need to visit official website of OBS and get your software tool installed on your system.

Step 2: Now launch OBS on your device and directly go to settings option.

Step 3: It is time to copy the stream key from YouTube and then paste it directly in the specified field of OBS.

Step 4: Users can now add their sources and scenes.

Step 5: Once all these settings are done then you can simply hit the option for start streaming and it will bring your content to YouTube directly.

3. Youtube Events set up

Live stream is little different from Stream Now platform as it allows users to schedule the streams as well as a connectivity to Google Hangouts is provided. These easy to follow steps will assist you to handle all settings for your events using Live Stream tool:

Step 1: Simply click on the schedule event option on screen.

Step 2: It is much easier to make settings for basic information as well as audience type. Make some desired changes to SNS platform. If you select the Quick type then it will directly select your webcam and you need not to make additional complicated settings whereas the custom type option provides easy set up options with OBS.

Step 3: The advance settings option works same as that of stream now features and users can adjust most of these settings as per their streaming needs.

Step 4: Users can turn monetization On or Off as per their preferences.

Step 5: As soon as you finish all above settings then simply click on the create event option.

Step 6: One more window will appear on your screen and here you can make adjustment for preferred bit rate. Also put your dedicated stream key with encoder.

Step 7: When all above steps are completed then you need to hit the option for save changes so that your tool can act accordingly.

Step 8: Now click on events and here you will be able to find your event. Move to live control room if you want to access complete details about this event and you can easily delete it.

Step 9: Users can set privacy terms or simple delete the event that is currently in action.

Video tutorial

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1. Stream Now set up
• Part2. Set up Your Live Streaming Encoder
• Part3. Youtube Events set up
• Part4. Video tutorial

1. Stream Now set up

Follow these steps to live stream your impressive videos to YouTube using Stream Now tool:

Step 1: First of all you need to login with your account and then move to Creator Studio option directly.

Step 2: Choose the Video Manager option from top most toolbar.

Step 3: From the drop down menu, simply select Live Streaming option to begin with.

Step 4: Now hot the steam now option on your screen.

Step 5: Change or Upload your thumbnail as per need.

Step 6: It is time to provide an eye catching title to your video, add description and finally choose category from the drop down menu.

Step 7: While using stream option, never forget to click on ‘make archive unlisted when complete’ option so that you can save as well as watch your content on YouTube at later stage.

Step 8: You can monetize your ads as per need.

Step 9: It also provides options to add cards.

Step 10: Now move to encoder setup and then simply copy and paste these details to your streaming software.

Step 11: Now you can set your live chat option as per your requirement.

Step 12: The analysis window will help you to know about how many viewers are connected to your video as well as the message updates will be reflected.

Step 13: Stream health can be monitored directly.

Step 14: One can also use the social media button for live shares.

2.Set up Your Live Streaming Encoder

As soon as you have completed the above set up then next task is to adjust settings of your streaming encoder. It is possible to make easy selection out of wide range of live streaming encoders. The details below are provided with reference to OBS too that is open source type free to access software.

Step 1: First of all you need to visit official website of OBS and get your software tool installed on your system.

Step 2: Now launch OBS on your device and directly go to settings option.

Step 3: It is time to copy the stream key from YouTube and then paste it directly in the specified field of OBS.

Step 4: Users can now add their sources and scenes.

Step 5: Once all these settings are done then you can simply hit the option for start streaming and it will bring your content to YouTube directly.

3. Youtube Events set up

Live stream is little different from Stream Now platform as it allows users to schedule the streams as well as a connectivity to Google Hangouts is provided. These easy to follow steps will assist you to handle all settings for your events using Live Stream tool:

Step 1: Simply click on the schedule event option on screen.

Step 2: It is much easier to make settings for basic information as well as audience type. Make some desired changes to SNS platform. If you select the Quick type then it will directly select your webcam and you need not to make additional complicated settings whereas the custom type option provides easy set up options with OBS.

Step 3: The advance settings option works same as that of stream now features and users can adjust most of these settings as per their streaming needs.

Step 4: Users can turn monetization On or Off as per their preferences.

Step 5: As soon as you finish all above settings then simply click on the create event option.

Step 6: One more window will appear on your screen and here you can make adjustment for preferred bit rate. Also put your dedicated stream key with encoder.

Step 7: When all above steps are completed then you need to hit the option for save changes so that your tool can act accordingly.

Step 8: Now click on events and here you will be able to find your event. Move to live control room if you want to access complete details about this event and you can easily delete it.

Step 9: Users can set privacy terms or simple delete the event that is currently in action.

Video tutorial

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1. Stream Now set up
• Part2. Set up Your Live Streaming Encoder
• Part3. Youtube Events set up
• Part4. Video tutorial

1. Stream Now set up

Follow these steps to live stream your impressive videos to YouTube using Stream Now tool:

Step 1: First of all you need to login with your account and then move to Creator Studio option directly.

Step 2: Choose the Video Manager option from top most toolbar.

Step 3: From the drop down menu, simply select Live Streaming option to begin with.

Step 4: Now hot the steam now option on your screen.

Step 5: Change or Upload your thumbnail as per need.

Step 6: It is time to provide an eye catching title to your video, add description and finally choose category from the drop down menu.

Step 7: While using stream option, never forget to click on ‘make archive unlisted when complete’ option so that you can save as well as watch your content on YouTube at later stage.

Step 8: You can monetize your ads as per need.

Step 9: It also provides options to add cards.

Step 10: Now move to encoder setup and then simply copy and paste these details to your streaming software.

Step 11: Now you can set your live chat option as per your requirement.

Step 12: The analysis window will help you to know about how many viewers are connected to your video as well as the message updates will be reflected.

Step 13: Stream health can be monitored directly.

Step 14: One can also use the social media button for live shares.

2.Set up Your Live Streaming Encoder

As soon as you have completed the above set up then next task is to adjust settings of your streaming encoder. It is possible to make easy selection out of wide range of live streaming encoders. The details below are provided with reference to OBS too that is open source type free to access software.

Step 1: First of all you need to visit official website of OBS and get your software tool installed on your system.

Step 2: Now launch OBS on your device and directly go to settings option.

Step 3: It is time to copy the stream key from YouTube and then paste it directly in the specified field of OBS.

Step 4: Users can now add their sources and scenes.

Step 5: Once all these settings are done then you can simply hit the option for start streaming and it will bring your content to YouTube directly.

3. Youtube Events set up

Live stream is little different from Stream Now platform as it allows users to schedule the streams as well as a connectivity to Google Hangouts is provided. These easy to follow steps will assist you to handle all settings for your events using Live Stream tool:

Step 1: Simply click on the schedule event option on screen.

Step 2: It is much easier to make settings for basic information as well as audience type. Make some desired changes to SNS platform. If you select the Quick type then it will directly select your webcam and you need not to make additional complicated settings whereas the custom type option provides easy set up options with OBS.

Step 3: The advance settings option works same as that of stream now features and users can adjust most of these settings as per their streaming needs.

Step 4: Users can turn monetization On or Off as per their preferences.

Step 5: As soon as you finish all above settings then simply click on the create event option.

Step 6: One more window will appear on your screen and here you can make adjustment for preferred bit rate. Also put your dedicated stream key with encoder.

Step 7: When all above steps are completed then you need to hit the option for save changes so that your tool can act accordingly.

Step 8: Now click on events and here you will be able to find your event. Move to live control room if you want to access complete details about this event and you can easily delete it.

Step 9: Users can set privacy terms or simple delete the event that is currently in action.

Video tutorial

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read: